KLARK TEKNIK DN9650

Digital Inputs Two 2-Channel Inputs
Type AES / EBU
Impedance 110Ω
Sample Rate 44.1kHz, 48kHz, 88.2kHz*, 96kHz*
Word Length 24-bit or 16-bit
*SRC Input at these sample rates

Analogue Inputs Four
Type Electronically balanced (Pin 2 Hot)
Impedance (Ω) Balanced 20k
Impedance (Ω) Unbalanced 10k
Common Mode Rejection >80dB @ 1kHz
Maximum level + 21dBu

Audio Outputs Eight
Type Electronically Balanced (Pin 2 Hot)
Minimum load impedance 56Ω/20nF
Source impedance 56Ω
Maximum level + 21dBu into > 2kΩ

Performance
Frequency response (20 Hz to 20 kHz) +/- 0.3dB with all filters and EQ flat
Distortion (THD+N) <0.02% @ 1kHz, +8 dBu Dynamic range (20 Hz to 20 kHz unweighted) >114dB

Input Processing (per channel)
Input gain +12dB to -40dB in 0.1 dB steps plus Off
Parametric EQ 1-12
Frequency range: 20Hz to 20kHz in 21 steps per octave
Boost/cut: +6/-18dB in 0.1dB steps
Q: 3.0 to 0.08
Compressor
Threshold: +21dBu to – 10dBu in 0.1dB steps
Attack: 40us to 100ms
Insert: On/Off
Release: 10ms to 2000ms
Ratio: 1:1 to 5:1
Knee: Hard/Soft
Delay 0 to 1 second 342.25 m or 1122′ 10? at 20(C) in 20.8us steps

Output Processing (per channel)
Routing Full featured matrix mixing: any combination of inputs can be routed to any output in .1dB steps from 0dB to ?40dB and OFF

Delay 0 to 300ms (102.68 m or 333′ 10? at 20(C)in 5.02 us steps)

Phase correction filters 0