EQUALIZER DBX-1231

Input Connectors : 1/4″ TRS, female XLR (pin 2 hot), and barrier terminal strip
Input Type : Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced : 40 kOhm, unbalanced 20 kOhm
Max Input : >+21dBu balanced or unbalanced
CMRR : >40dB, typically >55dB at 1kHz
Output Connectors : 1/4″ TRS, male XLR (pin 2 hot), and barrier terminal strip
Output Type : Impedance-balanced/unbalanced, RF filtered
Output Impedance : Balanced 200 ohm, unbalanced 100 ohm
Max Output : >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth : 20Hz to 20kHz, +0.5/-1dB
Frequency Response : <10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range
Dynamic Range : 109dB; 115dB
Signal to Noise Ratio : 90dB, 97dB
THD+Noise : <0.005%
Interchannel Crosstalk : <-80db, 20Hz to 20kHz
Bypass Switch : Bypasses the graphic equalizer section in the signal path
Low cut Switch : (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
Range Switch : (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
I/O Meter : 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Indicators : EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
Operating Voltage : 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
Power Consumption : 24W
Power Connector : IEC receptacle
Dimensions : 5.25″ H X 19″ W X 7.9″ D (13.4cm x 48.3cm x 20.1cm)
Unit Weight : 10.6 lbs.
Shipping Weight : 11.6 lbs.